ELK-9100 Remote controlled heavy duty switch, 220 Volts, 30 Amps, X10 activated
We find the most interesting Amp Remote. Here are the best deals we found for the ELK-9100 Remote controlled heavy duty switch, 220 Volts, 30 Amps, X10 activated for sale on the Internet.
If you want to find similar items currently for sale on eBay please click here.
ELK-9100 Remote controlled heavy duty switch, 220 Volts, 30 Amps, X10 activated Picture(s) and Description:
The ELK-9100 ULTRAMATE is a remote controlled heavy duty switch which may be used with 220/240 Volts A.C. electrical appliances, water heaters, pool pumps, or 110/120 branch lighting loads. It can be activated by an X-10 power line signal or contact closure source. The unit features built-in signal bridging across both legs of the 220/240 power circuit for improved performance of X-10 powerline signaling. It also features a selectable repeater function to provide more reliable X-10 communications over longer distances. It is ideal for general purpose switching of high current loads such as electric hot water heaters, baseboard heaters, water pumps, air conditioners, etc. I used this unit for about two years to control my electric water heater and it worked just fine. I've switched over the natural gas and so have no more need for it. These heavy duty switches retailed for over $140 new and were discounted to about $110. They have since been replaced by a new model that handles other signals besides X10. If you need to control a lot of current, this is the switch to have, and it also acts as a signal bridge. PLEASE READ BEFORE BIDDING! The unit was working when I took it out of service this spring, but since I now have no way of testing it I am selling it AS IS with no warranty or returns. Included is the switch and the electrical junction box which is needed for some installations like water heaters. Boring technical info: Features: - Controlled Remotely from X-10 Power Line Carrier Commands. - Optional Dry Contact Closure Activation. - 30 Amp Long Life Double Pole Relay Contacts. - Control One 220-240 Volts A.C. Device: Water Heater, Pool or Irrigation Pump, Heater, etc. OR - Control Two 115-120 Volts A.C. Devices: lights, Motors, etc. - Built-in signal bridging of the two 220-240 Volts A.C. legs improves X-10 signal performance in the entire building. - Selectable X-10 signal repeater functionality. - Single or Dual Commands may be programmed to turn the relay On/Off. Dual commands reduce false activation. - On-site programming of X-10 signal(s). - Manual On/Off Push Button Control. - LED Status indicators for X-10 signal, Circuit 1 (Relay 1), and Circuit 2 (Relay 2). - EEProm Memory remembers the last relay state in the event of a power fluctuation. - Heavy Duty PVC enclosure prefitted with 1/2" conduit connector. - Color coded 18" wire leads, #10 AWG, MTW, stranded nickel plated copper rated for 30 Amps A.C .. - Mounting hardware included. Specifications: - Operating Voltage: 220-240 Volts A.C., drawn locally from the electrical panel (line) source: - Nominal Current Draw: 26mA - Relay Contact Rating: 30 Amps at 120/240 Volts A.C. - Wire Harness: 18" wire leads, #10 AWG, MTW, stranded nickel plated copper rated for 30 Amps A.C. - Size: 4.36" W x 6.36" H x 2" D. Not suitable for wet locations. • Note: The ELK-9100 cannot be powered from GFCI Ground Fault Breakers. However, GFCI Breakers can be utilized on the output (load) side of the ELK-9100. • Note: The ELK-9100 is not compatible with the Leviton model 6325 Telephone Transponder due to some non-standard line signals that the Leviton transmits.